1、 Equipment Usage
1.1. This equipment is particularly suitable for simultaneous grinding or polishing of the upper and lower parallel end faces of glass, ceramics, sapphire, metal, and non-metal materials.
2、 Equipment structural characteristics
2.1 Innovation is the fundamental concept of design. During the design process, this equipment carefully analyzed and compared the structural, control, and functional characteristics of similar devices at home and abroad, and comprehensively summarized and adopted the successful experience and reasonable suggestions of numerous users. Efforts should be made to improve the technical content, operational accuracy, and smoothness of the equipment.
2.2 Advanced PLC program controller is adopted to control the actions of the whole machine, with a high degree of automation, and a matching large screen touch screen is used as the interface to display the current status of the whole machine, achieving human-machine dialogue and clear operation at a glance.
2.3 Adopting variable frequency speed regulation and full gear transmission, the whole machine starts smoothly and runs stably, especially at low speeds, overcoming the phenomenon of movement and crawling of the upper and lower grinding discs.
2.4 The pneumatic actuator produced by Yadeke is matched with pneumatic control components to achieve independent control of the grinding disc in five stages. The pressure and speed of each stage can be gradually increased and decreased smoothly. The weight of the upper disc is 400kg, and it can be pressurized up to 480kg, providing better grinding efficiency and a wider range of grinding process options for grinding workpieces.
The 2.5 large gear ring can be raised and lowered, and the lifting position can be adjusted. The height of the sun gear can also be adjusted by periodically increasing or decreasing the number of shims.
2.6 Dual motor version: adopts dual motors and dual variable frequency drive. Drive the upper and lower grinding discs and gear rings with the main motor (9KW/1400r/min); Drive the sun gear with a secondary motor (2.2KW/1440r/min). The auxiliary motor and the main motor are synchronously regulated in proportion.
2.6.1 Three motor version: Using three motor drive, the lower disc and gear ring are driven by a lower disc motor (7.5KW/1440r/min); Drive the upper grinding disc with an upper disc motor (5.5KW/1440r/min); Drive the sun gear with a small motor (1.5KW/1440r/min).
2.7 Equipped with a main cylinder locking mechanism, it can conveniently and safely lock the grinding disc.
2.8 The transmission gear is lubricated by an automatic fuel pump at regular intervals, which is easy to maintain and has a long service life.
3、 Main technical parameters
简体中文
English
