Double sided grinder 9B model (2)

1、 Equipment usage
1.1.      This device is suitable for grinding or polishing ultra-thin glass, ceramics, sapphire, metal and non-metal materials.

2、 Equipment structural characteristics
2.1 Innovation is the fundamental concept of design. During the design process, this equipment carefully analyzed and compared the structural, control, and functional characteristics of similar devices at home and abroad, and comprehensively summarized and adopted the successful experience and reasonable suggestions of numerous users. Efforts should be made to improve the technical content, operational accuracy, and smoothness of the equipment.

2.2 Advanced PLC program controller is adopted to control the actions of the whole machine, with a high degree of automation, and a matching large screen touch screen is used as the interface to display the current status of the whole machine, achieving human-machine dialogue and clear operation at a glance.

2.3 Adopting an internal gear ring lifting system makes it extremely convenient to install and remove workpieces. The lifting of the inner ring gear is driven by a cylinder, and the lifting is smooth without shaking. The lifting of the ring gear is done by a jog method, which can control the height of the ring gear lifting and ensure that the ring gear and sun gear wear evenly throughout their entire length, extending their service life.

2.4 Adopting three motor drive, the main motor (4KW/1440r/min) drives the lower grinding disc and gear ring; Drive the upper grinding disc with a secondary motor (3KW/1440r/min); Drive the sun gear with a secondary motor (1.5KW/1440r/min).

2.5 The pneumatic actuator produced by Yadeke is matched with the pneumatic control element, and is divided into eight independent control stages. The pressure and speed of each stage can be gradually increased and decreased smoothly, with a maximum pressure of 300kg, providing better polishing efficiency and a wider range of grinding process options for grinding workpieces.

2.6 The main load-bearing gears of the entire machine are reinforced gears, and through strict quenching and tempering treatment, the strength and stiffness of each load-bearing transmission component are greatly improved. At the same time, it also reduces the overall noise and vibration of the machine.

2.7 Equipped with a main cylinder locking mechanism, it can conveniently and safely lock the grinding disc.

2.8 The transmission gear is lubricated by an automatic fuel pump at regular intervals, which is easy to maintain and has a long service life.

3、 Main technical parameters:
I need