A device, use
1.1. this equipment is especially suitable for grinding or polishing the upper and lower two parallel ends of glass, ceramics, sapphire, metal and non-metallic materials.
Two, the equipment structure of
2.1, innovation is the basic idea of design. During the design, the equipment carefully analyzed and compared the structure, control and function characteristics of the similar equipment at home and abroad, and synthesized, summarized and adopted many successful experiences and reasonable suggestions of users. The technology content, operation precision and running stability of the equipment are improved.
2.2, the advanced PLC program controller is adopted to control the whole machine's action, with high degree of automation, and interface with the large screen touch screen to display the current state of the whole machine, so as to achieve man-machine conversation and operation at a glance.
2.3, variable frequency speed control and all gear transmission are used to make the whole machine start smoothly and operate stably, especially when running at low speed, and overcome the movement and creeping phenomenon of the upper and lower grinding plates.
2.4 the production of AIRTAC pneumatic actuators and pneumatic control components, to achieve independent control of the grinding wheel in five stages, each stage of the pressure and speed can be gradually increase smooth adjustment, hanging weight 400kg, and the highest pressure 480KG, provide more excellent grinding efficiency and grinding process of a wider selection for grinding the workpiece.
2.5 ring gear lifting, and lifting position can be adjusted. The height of the sun wheel can also be adjusted by the number of spacers on a regular basis.
2.6 dual motor version: dual motor and dual frequency drive. Use the main motor (9KW/1400r/min) to drive the upper and lower grinding disc and the gear ring; use the auxiliary motor (2.2KW/1440r/min) to drive the sun wheel. The auxiliary motor and the main motor are synchronously speed regulating in proportion.
2.6.1 three motor version: three motor drive, lower plate motor (7.5KW/1440r/min) driving the grinding disc and gear ring, the upper plate motor (5.5KW/1440r/min) to drive the upper grinding disc, and the small motor (1.5KW/1440r/min) to drive the sun wheel.
2.7 is equipped with the locking mechanism of the main cylinder, which can lock the grinding disc conveniently and safely.
The 2.8 transmission gear is lubricated by the automatic refueling pump, it is simple in maintenance and long in life.
Three, the main technical parameters of